Cleaning Limestone and Furring on Heat Transfer Surfaces

   The heat transfer systems benefit from the energy transfer characteristics of the water. The lime salts in the water, causes the formation of furring layer in the heat exchangers such as boilers and serpentines, and especially on the heat transfer surfaces of the boilers. This furring layer reduces the efficiency of the heating and cooling systems by hampering the heat transfer.

Flushing Applications in Closed Circuit and HVAC Systems

   With the close-circuit HVAC heating and cooling systems that benefits from the heat transfer characteristics of the water, the cooling or heating of the machines and equipment at various locations in the plant is ensured by the water that is cooled or heated in a central station. It is aimed to ensure that the systems operate at the certain temperature through the continuous cycle. For this purpose, it is tried to minimize the effects of the factors that may block or hamper the heat transfer, or the failures which may occur in the heat transfer systems.

Cooling Tower Water Treatment

 The machines and equipment at various locations in the plant get heated due to their functions and therefore their efficiency decreases as they get warmer or even they cannot function because of thermal increase. And certain areas in the plant need to be cooled.

Steam Boiler Water Treatment

   The aim of heat transfer systems that benefits from the energy transfer characteristics of the water, is to transfer the heat, which is loaded to the steam through the steam boilers, to another location with the highest possible efficiency. For this purpose, it is tried to minimize the effects of the factors that may block or slow down the heat transfer, or the failures which may occur in the heat transfer systems.

What is Membrane Autopsy?

   Membrane autopsy is required when you want to have a final solution regarding the reduced membrane performance. We recommend you the Membrane Autopsy to improve the performance of your membrane, you will interpret the results obtained. As Deren Kimya, we can determine the types of contamination and damage that blocks the membranes, and we can also suggest the steps you need to take. If the examinations made at a standard manufacturing facility do not solve the problem, then the membrane autopsy is inevitable. Membrane autopsy procedure should be applied to analyze the contamination in the membrane.

Categories

Legionella Bakterisi
Legionella Kontrolü
Lejyonella
Mikrobiyoloji
Risk Değerlendirme